sexy halloween costumes red bottom shoes cheap homecoming dresses

What are Different Types of Charcoal?

Home > Blogs >

Charcoal is used as a type of fuel, most commonly to fuel grills for cooking. There are several different types of charcoal a grill chef can choose from, with the most common types being briquette, lump, and extruded.

Among the briquette variety, there are several different types of charcoal. Generally, the briquette is made from a combination of charcoal, mineral carbon, brown coal, borax, sodium nitrate, sawdust, limestone, and starch. Each of these ingredients has its own special properties to contribute to the charcoal briquette. The charcoal, along with the mineral carbon and the brown coal, serves as a heat source. The borax is a press release agent, while the starch is a binder. The sodium nitrate and the sawdust both assist with ignition, and the starch is a binder.

Other different types of charcoal briquettes may be marketed as “natural.” In this case, they may only contain charcoal and starch. Still other different types of charcoal briquettes contain additional ingredients, such as lighter fluid or paraffin, in order to make them easier to light. The addition of these ingredients does not create a health hazard in these different types of charcoal, because the fuel is burned off before it can contaminate the food.

Charcoal Briquettes

There are also other different types of charcoal that contain ingredients meant to help add flavor to the food, such as mesquite. These ingredients are part of the charcoal and, therefore, do not burn off like the lighter fluid. The smoke that results from burning these different types of charcoal contains the flavor, which is added to the food during cooking.

Lump charcoal is one of the other different types of charcoal. This charcoal is created solely from hardwood and, as a result, burns hotter than other types. Since lump charcoal burns at such a high temperature, it creates less ash than briquette charcoal.

Charcoal Briquetter Machine

Extruded charcoal is created through a process called extrusion, which is a highly pressurized process that pushes materials through a preset mold. In this case, the material is either carbonized wood or raw ground wood. Through the extrusion process, these different types of charcoal are made into log shapes.

High-Performance Hydraulic Propelling Device